Cordless Tools Review Header Image

Cordless Screwdrivers

A screwdriver is a handy tool when it comes to doing the tits-bits in the household. It is always recommended to have a screwdriver in your tool box. And if you have one you know how it is helpful in reaching the right corners to perform the jobs.

But a corded screwdriver is not always the right solution, mainly when it comes to reaching the tight corners, doing outdoor jobs, or you have a wrist problem. In such cases the corded screwdriver is no longer a trusted tool but requires more than that. In times likes this cordless screwdriver is the much needed solution. The cordless screwdriver unlike its corded counterpart runs on rechargeable battery and much useful in reaching the tight corners or performing outdoor jobs or can be used by people having arthritis or wrist problem. It is a handy tool and can be used anywhere you please without bothering and managing the cord.

The cordless screwdriver runs on a rechargeable battery pack which can last till you finish your job. You can take it outdoors as it very handy and takes less storage space. Due to the lack of cord you can move it like you want to reach the tight corners. So the cordless screwdriver is really a good option and a useful tool in your toolbox. Moreover the new generation cordless screwdrivers come with a strong battery which can last long before you again recharge it.

When you opt for an electric cordless screwdriver look for the following factors:
• Forward/Reverse Switch: Because you may have to remove screws as well.
• Adjustable Angles: For those tight corners.
• Keyless Chuck: Allows quicker release and bit changes.
• Cordless Screwdriver Bit Kit: Always better in different sizes.
• Narrowed Extended Tip: For particularly deep nooks and crannies.
• Magnetic Extension Bit: For the deepest nooks and crannies.
• LED: Light Emitting Diode for darkened nooks and crannies.
• Battery Life: battery should last this long before recharging (5, 7, etc. Hours)
• Torque: Twisting strength (20, 80, etc. lbs.).
• RPM: Revolutions Per Minute, i.e. twisting speed (150, 200, etc.).
• Padded Handle: For comfort and strong grip during use.
The decision to buy a cordless screwdriver should never be rushed into. Prior to that short-list the cordless screwdrivers by reading the reviews and taking into consideration the customer feedback. It highly recommended if you can have a practical trial of the product at the hardware store. Compare the products on prices and on the points mentioned above. Thus you can finalize the right cordless screwdriver for your toolbox.

The recommended and most trusted manufacturers of cordless screwdrivers are Black and Decker cordless screwdriver, the cordless Makita screwdriver and the cordless Craftsman screwdriver.

About the author:
Looking for more information on Cordless Screwdrivers check out cordlessbest.com your guide to Cordless Screwdrivers. From Free-Articles-Zone.com.

Advice on How to Choose the Best Cordless Tools in Todays Crowded Marketplace

The indispensable cordless tools, how did we ever get along without them? If your cordless tools are more than a few years old maybe it is time to take a look at the new breed of tools available.

The most noticeable advancements have been in the battery life, charging time, ergonomics, and torque. If your cordless tools are more than a few years old, maybe you should consider taking a look at what’s new in the market. Over the years it’s been my experience that when it comes to cordless tools, you actually get what you pay for! This does not mean you need to purchase the most expensive tool on the shelf.

So maybe you have decided to take a look for yourself? There are many factors to consider when it comes to cordless tools. Will it be used all day long or only once in a blue moon? If you are a homeowner and only use cordless tools around the house for minor projects and repairs, there is no need to buy the top of the line tools. However as I stated before you actually get what you pay for, with this in mind I would strongly recommend staying away from the cheaper tools.

Let’s just pretend you are driving past the local Mega-lumber/roofing/tool store when you suddenly remember you have been wanting to stop in and check out a new cordless drill. You arrive in the tool aisle and you see a 25 ft. long shelf, three levels deep, with nothing but cordless drills. Aqua blue, black, bright orange, light green, putrid green, red, yellow, amongst others which I can not identify. Where does a person start?

Here are a few ideas to help get you started. Ask your dad, brother, brother-in-law, co-worker, father-in-law, or local handyman. Still do not have an answer, then please read on.

Battery strength is one of the most important factors when choosing any cordless tool. Be wary when evaluating battery strength, higher voltage batteries are not always the best. The type of battery plays a big factor in how the drill will perform over a period of time Nick-Cad (Good), Lithium-Ion (Best). Amp/hr is where the cheaper tools fall on their face 1.4 (bad) 2.4 (good).

Chuck size is another factor in determining the purchase of a cordless drill. For the average homeowner a 3/8" should be fine, however for heavier work a 1/2" drill should be considered.

Torque means how hard can the drill twist, the higher the better.

Weight of the drill can actually give you a good idea of how well its built, after all, steel gears are heavier than plastic ones.

Color can also tell you quite a bit about a drill, specifically, where it is manufactured. Aqua blue (Switzerland), red (Czech), yellow (Mexico), and sometimes the name will even give it away, Nissan etc.

Aqua blue is my color of choice. I realize there is no comparison between a watch and a cordless drill, but by the same token, there is no comparison between a Swiss watch and a Chinese watch either.

I purchased a cordless tool combo-kit of the 18-volt aqua blue variety in the late summer of 2006. The bag contained a quick 30 minute charger, two 2.4 amp/hr batteries, sawzall, circular saw, flashlight, drill, and a jigsaw. I took it home and fully charged the batteries as the manufacturer recommended. Within a couple of days I had to drive approximately 1,500 3" screws in treated lumber. My new aqua blue drill performed this task with room to spare, something that would have sucked the blood out of my yellow drill. As of this writing I have no complaints about my aqua blue tools, and would recommend them to everyone.

As far as I know there are no longer any cordless tools manufactured in America and until such a time my hat is off to the Swiss and aqua blue! More information is available on my website. http://www.constructiontoolstore.com . Author Rickie Bell.